Training and Information Sessions
Learn From Those That Write The Standards And Influence The Industry
![]() |
![]() |
![]() |
Stuart McIntosh | Andrew Brand | Michael Weekes |
Victorian Service & Installation Rules
Group Metering, Multiple Installations, SPD’s SCCD’s and Subdivisions. Understand them and use them to your advantage – hear from Stuart McIntosh, the Institute of Electrical Inspectors Deputy Chairman and member of the Victorian Service & Installation Rules Management Committee. |
The Wiring Rules - AS/NZS 3000
Andrew Brand, the Institute of Electrical Inspectors representative on the Standards Committee EL001. Hear about what’s in the new edition and when can we expect it to be released. Have your Regulation questions ready. Andrew will point you in the right direction. |
Embedded Networks
What’s an Embedded Network and why should I know about them. It’s the future of large Multiple Installations. We will show you all need to know about designing them and ensuring the smooth inspection, testing & connection of installations within your Embedded Network. |
![]() |
Design a Body Protected installation to AS/NZS 3003
Are you aware that Body Protected patient treatment areas require a Prescribed Electrical Inspection? Let us show you how to design a Body Protected installation so it meets the requirements of AS/NZS 3003. These areas include: Doctors Treatment Rooms, Dental Clinics, Physiotherapy & Chiropractic Rooms and Imaging Practices. |
Understanding the Electricity Safety Act & Performing Investigations
Let Michael Weekes show you what is required to perform an investigation. Michael is President of the Victorian Association of Fire Investigators and has had considerable experience investigating all types of incidents. |
How to Connect Generators
Andrew Brand is the Institute of Electrical Inspectors representative on the Standards Committee EL001-24 AS/NZS 3010 - Electrical Installations Generating Sets. Andrew will explain the most common issues with connecting a Generator to an installation. Do I switch the Neutral? How do the Safety Services affect the design? Do I use an ATS or MTS? This information session should not to be missed. |